PV-1.0

Series PV - Pneumatic Piston Vibrator Continuous Impact

PV-Series Continuous Impact Vibrators produce a shockwave generated by the continuous impact of their internal piston on the metallic base mount welded on the or wall.
They are particularly efficient with bulk materials that tend to stick to the wall. Typically P-series vibrators are used wet or electrostatics powders such as clay or , but also sludge or manure.

PV-Series Continuous Impact Vibrators help solving problems such as formation of incrustations, bridging or rat-holing, operating continuously applying intermittent blows on the or at a pressure ranging from 2 to 6 bar (29 ~ 87 PSI).
When operating multiple impact vibrators, those at the bottom should be activated first, moving progressively upwards at regular intervals to the upper ones.
The robustness of the PV-series design makes these vibrators suitable both outdoor indoor application, as well as high temperatures of up to 200 °C (390 °F).

The external body parts are manufactured from aluminium from powder-coated (RAL 2009) grey cast iron.

PV-Series vibrators are assembled on a base mounting plate (not supplied) which has to be welded on the , or wall. It is recommended to fix a safety chain to the vibrator to avoid accidental dropping during installation or maintenance.
To satisfy all market needs three sizes are available.

PV-Series Continuous Impact Vibrators produce a shockwave generated by the continuous impact of their internal piston on the metallic base mount welded on the or wall.
They are particularly efficient with bulk materials that tend to stick to the wall. Typically PV-series vibrators are used wet or electrostatics powders such as clay or, but also sludge or manure.
PV-Series Continuous Impact Vibrators help solving problems such as formation of incrustations, bridging or rat-holing, operating continuously applying intermittent blows on the or at a pressure ranging from 2 to 6 bar (29 ~ 87 PSI).
When operating multiple impact vibrators, those at the bottom should be activated first, moving progressively upwards at regular intervals to the upper ones.
The robustness of the PV-series design makes these vibrators suitable both outdoor indoor application, as well as high temperatures of up to 200 °C (390 °F).
The external body parts are manufactured from aluminium from powder-coated (RAL 2009) grey cast iron.
PV-Series vibrators are assembled on a base mounting plate (not supplied) which has to be welded on the , or wall. It is recommended to fix a safety chain to the vibrator to avoid accidental dropping during installation or maintenance.
To satisfy all market needs three sizes are available.

Features:

  • Application: hopper silo – salt spreader – dump trailer – rail cart
  • Powder: hygroscopic – humid – sticky
  • Problem solving: bridge and rat-holing
  • Duty cycle: continuous
  • Working Pressure: from 2 bar to 6 bar (from 29 psi to 87 psi)
  • Pneumatic circuit: fitler + flow control valve + lubrification + 3/2 ways valve
  • Air supply quality: class 5.4.4.
  • Working temperature: from -20 degrees C to 200 degrees C (-4 degrees F to 392 degrees F)
  • Max noise level: 100dB(a)
  • Technology: piston pneumatic impact
  • Material: grey cast iron body (power painted)- aluminium cover

Options:

  • Safety chain: available 
Request Information Print Page

Overall Dimensions

PV-1.0

A 91.5 mm
3.57 in
A1 102.0 mm
3.98 in
B 148 mm
5.77 in
C 85 mm
3.32 in
C1 114 mm
4.45 in
D 66 mm
2.57 in
E 21 mm
0.80 in
Ø F 13 mm
0.51 in
Ø G 56 mm
2.18 in
P IN NPT 1/4"
L 30 mm
1.17 in
L1 12.5 mm
0.49 in
M OUT NPT 1/4"
WEIGHT 2.2 kg
4.9 lbs

Technical Data

PV-1.0

Product Attributes

Technology

Piston

Force Applied

Linear Impacting

Power Source

Air

Frequency (Max)

Moderate - 4,500 (Max)

Amplitude

Moderate to High

Air Consumption

Low

Noise

High

Air Prep Required

Filter (5 Micron)-Regulator-Lubricator

Maintenance

Occasional Cleaning

Force Output (Max)

214

Force Output Adjustment

Controlled Through Air Pressure Regulation

General Applications

Powerful Linear Force to Ensure Flow from Bins, Hopper, Pipes Chutes, & Screens - Best used for Sticky, Damp, High Density, Stubborn Materials and Vibration Compaction/Settling Tables

General Industries

READY MIX PLANTS, ASPHALT PLANTS, BULK MATERIAL HANDLING, AGRICULTURE, CHEMICAL, FOOD PROCESSING, PACKAGING, PHARMACEUTICALS, PLASTICS, STEEL & FOUNDRY

Features & Benefits

  • Low Maintenance
  • Rugged & Economical

Air Inlet Size

1/4" NPT

Weight

4.9 lbs

Product Industries

Product Applications