FN Fluidizing Nozzle (2 Products)

FN100and FN200 Aeration Nozzles can be easily fitted on bins or silos from outside which makes them particularly suitable for retrofitting or in cases where the inside of a bin cannot be accessed. For sizing, layout and number of nozzles refer to the relevant data sheet.

The plastic insert with the sintered metal nozzle has to be screwed into the steel nipple which has been previously welded on the outside of the bin or silo. Then the connection with the compressed air line has to be carried out.
FN100 Aeration Nozzles are used with fine powdery materials at a working pressure of 3 PSI, while FN200 Aeration Nozzles work with a pressure of 14 PSI.
Decades of experience with FN100 and FN200 have shown that virtually all materials can be successfully fluidized at intermittent operation according to Pulse-Jet or Felder System.
For food-grade applications the use of FD-type Vibrating Aerators is recommended.

Request Information Print Page

Product Table

Item #
Technology
Type
MATERIAL OF CONSTRUCTION
Air Pressure (Max)
Air Usage (Max)
General Applications
FLUIDIZING FLOW-AID
NOZZLE
C.S. Mount Coupling, Sintered PE Filter, Nylon (UV Resistant) Body
3 PSI
0.03CFM
Works best for Cement & Lime Powder
FLUIDIZING FLOW-AID
NOZZLE
C.S. Mount Coupling, Sintered PE Filter, Nylon (UV Resistant) Body
3 PSI. to 14 PSI.
1.1 CFM
Works best for Cement & Lime Powder

Product Industries

We Have a Solution for your Material Flow Needs 855-969-3413