Back to previous page
Stainless Steel Pneumatic Turbine Vibrator
Description
 The TV Stainless Steel Pneumatic Turbine Vibrator is
comprised of a body section, one end plate having
a right hand thread, and a detachable foot. Vibration
is produced by the centrifugal force of the positive
and negative unbalanced moments in the rotor. The
rotor is supported on two heavy duty pre-lubricated
matched sealed bearings. A special high performance
grease ensures a long working life. The inner and
outer raceways of the bearings are designed so that
the bearings can easily be removed without using
special tools.
Maximum temperature 120°C = 250°F.
Noise level range 60 to 75 dB.
Application
The TV SS range of turbine vibrators are suitable for
use in the Food and Pharmaceutical industries and in
hazardous areas where contact with non-ferrous materials,
paint, or exhaust contaminated oil is not acceptable.
No lubrication is required, but clean filtered air is essential.
These vibrators are extremely
quiet, thus helping to conform with noise regulations.
On request can be supplied with ATEX certification
to ATEX 95 94/9/EC Ex II 2 G & D Zone
1, 2, 21, 22
Technical
Data- 2 BAR - 30 PSI
Model |
Vibration |
Force |
Air Consumption |
VPM |
N |
Kg |
lb |
L/min |
Cfm |
TV-10SS |
27,500 |
583 |
59 |
131 |
46 |
1.6 |
TV-16SS |
17,000 |
1103 |
112 |
248 |
120 |
4.2 |
TV-25SS |
12,000 |
1784 |
182 |
401 |
185 |
6.5 |
Technical
Data- 4 BAR - 60 PSI
Model |
Vibration |
Force |
Air Consumption |
VPM |
N |
Kg |
lb |
L/min |
Cfm |
TV-10SS |
35,000 |
946
|
96 |
213 |
80 |
2.8 |
TV-16SS |
21,500 |
1764 |
180 |
397 |
200 |
7.0 |
TV-25SS |
15,500 |
2977 |
304 |
669 |
325 |
11.4 |
Technical
Data- 6 BAR - 90 PSI
Model |
Vibration |
Force |
Air Consumption |
VPM |
N |
Kg |
lb |
L/min |
Cfm |
TV-10SS |
37,500 |
1086 |
111 |
244 |
112 |
3.9 |
TV-16SS |
24,000 |
2198 |
224 |
494 |
290 |
10.2 |
TV-25SS |
17,000 |
3581 |
365 |
805 |
455 |
16.0 |
Overall
Size
Model |
A |
B |
C |
D |
E |
F |
øG |
mm |
in |
mm |
in |
mm |
in |
mm |
in |
mm |
in |
mm |
in |
mm |
in |
TV-10SS |
49 |
1.93 |
55 |
2.17 |
38.1 |
1.50 |
30 |
1.18 |
68 |
2.68 |
6 |
0.24 |
7
|
0.28
|
TV-16SS |
64 |
2.52 |
74 |
2.91 |
45.5 |
1.79
|
40 |
1.57 |
90 |
3.54 |
10 |
0.39 |
9
|
0.35
|
TV-25SS |
78
|
3.07
|
88
|
3.46 |
55.5 |
2.19 |
50 |
1.97 |
104 |
4.09 |
10 |
0.39 |
11
|
0.43
|
Data obtained on a heavy laboratory test block. Frequency and force will
decrease on a less rigid mount.
|
