Back to previous page

Portable Vibrators

Description
The DCM vacuum clamp comprises of one or more powerful suction cups operated by a special generator incorporated in a robust vibrator mounting plate. Each unit comes complete with 2 x 2 meters of hose and on/off valves that independently control the vacuum and vibrator. The mounting plate can be drilled to suit the various vibrators shown below.

Application
The DCM vacuum clamp has been designed as a means of rapidly attaching pneumatic vibrators to almost any fairly smooth surface. It has been developed as a discharge aid from metal, plastic or even cardboard containers or pipes where vibrators cannot be fixed by conventional means.

Model
Min.
Diameter
Air Consumption
Can be attached to
DCM-10
55mm
56 l/m
DAR2, K8, K10, GT4, GT6, GT8, GT10, PLV-12(S/M/L), PLV-18(S/M/L), R50, T50(LP/HP), DOV 155, DOV 165, DOV-AL 18
DCM-12
175mm
56 l/m
DAR2, DAR4, K8, K10, K13, K16, K20, K25, PLV-25(S/M/L), PLV-35(S/M/L), R50, R80, GT8, GT10, GT13, GT16, GT20, GT25, T50LP/HP, T80LP/HP, V150.
DCM-15
380mm
56 l/m
DAR2, DAR3, K8, K10, K13, K16, GT4, GT6, GT8, GT10, GT13, GT16, PLV-12(S/M/L), PLV-18(S/M/L), R50, R65, T50(LP/HP), T65(LP/HP), DOV 155, DOV 165, DOV 255, DOV-AL 18, DOV-AL 25
DCM-15D
380mm
DAR4, GT20, GT25, GT30, K20, K25, K30, K36, R80, T80(LP/HP), PLV-25(S/M/L), PLV-35(S/M/L), DOV-AL25, DOV-AL35, PLV-50M, PLV-75/01,PLV-50/01, DI-150S
DCM-150S
151 l/m
DCM-20D
430mm
DAR5, GT30, GT36, GT40, GT48, R100, T100HP, PLV-50M, PLV-75/01, PLV-50/01, PLV-60M, PLV-95M, DI-200S
DCM-20T
500mm
168 l/m
PLV-50/10
DCM-200S   151 l/m  


DCM-10 & DCM-12

DCM-15


DCM-15D / 20D


DCM-20T